Seeing the tire pressure warning light on your Toyota Corolla’s dashboard? Don’t worry—it doesn’t always mean there’s a serious issue. Most of the time, it’s a simple fix. This guide walks you through exactly how to reset the tire pressure light on your Corolla, no matter which model year you drive.
Plus, we’ll explain why the light comes on, how to prevent false warnings, and how to care for your tire pressure system to avoid problems down the road.
What Does the Tire Pressure Warning Light Mean?
The tire pressure warning light means that one or more of your tires are underinflated or the tire pressure monitoring system (TPMS) needs to be reset.
The TPMS is there to help you avoid driving with low tire pressure, which can cause blowouts, reduce fuel efficiency, and wear tires unevenly.
When Should You Reset the Tire Pressure Light?
- You’ve added air to your tires, but the light is still on
- You’ve rotated or replaced tires recently
- You’re switching between winter and summer tires
- You fixed a tire puncture or slow leak
How to Check Your Tire Pressure Before Resetting
Before resetting the light, always make sure your tires are inflated to the correct pressure.
- Locate the tire pressure label on the inside of the driver’s door.
- Use a reliable tire pressure gauge to check each tire (when tires are cold).
- Adjust the pressure to match the recommended PSI (usually around 32–35 PSI).
- Don’t forget the spare tire if it’s a full-size spare—it may be included in the TPMS system.
Step-by-Step: How to Reset Tire Pressure Light on Toyota Corolla
Method 1: Using the TPMS Reset Button
Most Toyota Corolla models (2010–2019) have a TPMS reset button located under the dashboard or near the steering column.
- Turn the ignition to “ON” without starting the engine.
- Locate and press the TPMS reset button (hold it until the light blinks slowly three times).
- Start the engine.
- Drive the vehicle for about 10–30 minutes at speeds over 30 mph.
This allows the system to recalibrate and should turn off the warning light.
Method 2: Using the In-Dash Menu (Newer Models)
Newer Corolla models (2020 and up) often don’t have a physical button—instead, they use the infotainment system or steering wheel controls.
- Turn the ignition to “ON” mode (engine off).
- Use the arrow buttons on the steering wheel to navigate to the settings menu.
- Select “Vehicle Settings” or “TPMS” depending on your model.
- Choose the “Relearn” or “Reset Tire Pressure” option and confirm.
- Drive the vehicle for at least 10 minutes to complete the process.
Other Methods to Try if the Light Stays On
- Double-check all four tires AND the spare
- Inspect tires for nails or visible damage
- Use a TPMS scan tool to identify a faulty sensor
- Try disconnecting the car battery for 10 minutes (last resort method)
Why the Light May Stay On After Resetting
If your tire pressure light won’t turn off, one of the following could be the reason:
- The tire pressure is still not correct (too low or too high)
- A sensor battery is dead or faulty (common after 7–10 years)
- There’s interference from aftermarket parts or wheels
- The TPMS system wasn’t given enough time to recalibrate
How to Prevent TPMS Light Issues in the Future
Follow these simple habits to avoid TPMS warnings:
- Check your tire pressure monthly (including your spare)
- Adjust pressure seasonally—cold weather reduces tire PSI
- Rotate tires every 5,000 to 7,500 miles
- Have TPMS sensors checked during regular service
Pro Tip: Save Big on Car Battery Maintenance Too
TPMS sensors run on batteries, but so does your entire car. If your Corolla’s battery is getting weak, consider reconditioning it before paying for a replacement.
👉 Click here to get the New Battery Reconditioning Course and learn how to bring your battery back to life using simple tools.
This course has helped thousands of drivers save hundreds by extending battery life and avoiding costly replacements. It’s great for car, hybrid, and even household batteries.
Real Driver Story: Quick Fix on the Road
Sarah, a Corolla owner in Pennsylvania, got a TPMS warning on a cold morning. After checking her tires, she added air and hit the TPMS reset button under the dash. “It took about 20 minutes of driving for the light to go out, but it worked perfectly,” she said. “Now I check my pressure every couple weeks just to be safe.”
Final Thoughts
Resetting the tire pressure light on your Toyota Corolla is quick and easy—once you know the right steps. Whether you use the reset button or your car’s digital settings, the key is to first make sure your tires are properly inflated.
Make TPMS checks a regular part of your car care routine to stay safe and avoid unnecessary warning lights.